84
·
Click on
to add a new template group.
·
Under Name you can name the group, under Picture you can include a picture
with
.
-
With
you create a new template. Here just as well, you can change the
name (under Info) and insert a picture. Once you have created five templates
into a group, you cannot add any more into this group. On the page
Configuration you can set the sensor type and the time signals desired.
-
With
you add new characteristic values to the template. More information
to that you will find in "Set up characteristic values
".
·
In order to add a new balancing configuration to the template group click on
For more information refer to Add balancing configuration
..
·
In order to add a new run up / coast down configuration to the template group
click on
For further details see "Setting up run up/coast down
".
·
With
you can delete the element selected from the list.
·
With
and with
you can unfold the tree starting from the element
selected or close again respectively.
3.6.3 Send route
There are two ways to send a route to the detector:
·
Click on
Detector
>
Send Route
(or on
) in the configuration window.
50
53
61
