![background image](http://html1.mh-extra.com/html/fadini/drive-700/drive-700_instruction-manual_3188007004.webp)
WIRING DIAGRAM AND ACCESSORIES
1 - Flasher
2 - Controller with plug-in receiver
3 - 230 V - 50 Hz 0,03 A magneto-thermal circuit breaker (recommended cable section 2,5 mm² beyond 100 m)
4 - Photocell receiver
5 - Motor-pump unit
6 - Cable junction pit
7 - Oil-hydraulic underground jack
8 - Ground gate stop
9 - Post with photocell transmitter
10 - Post with photocell receiver
11 - Electric lock (for Drive 700 Estru reversible motor-pump unit or in case of gate leaves wider than 2 meters)
12 - Photocell transmitter
13 - Keyswitch
14 - Gate stop in closed position
15 - Radio transmitter
Pic. 2
Indicative layout: it is the installer’s responsibility to provide and lay the tubes for the electrical connections.
English
4
Underground oil-hydraulic operator with separate motor-pump
DRIVE 700
IMPORTANT:
suitable stops in open and closed gate positions are most important for the
correct functioning of the Drive 700 system.
!
2
3
8
9
11
12
13
14
15
10
5
6
230 V - 50 Hz ±10%
1
2x1 mm²
2x1 mm²
RG58
4x1 mm²
4x1 mm²
4x1,5mm²
4x1,5mm²
2x1 mm²
2x1 mm²
4x1 mm²
4
7
istr_drive700_GB.ai 4 10/05/2022 15:15:50