![background image](http://html1.mh-extra.com/html/fadini/drive-700/drive-700_instruction-manual_3188007011.webp)
English
Underground oil-hydraulic operator with separate motor-pump
DRIVE 700
11
+ slowdown
SLOWDOWN SETTING
Gate slowdown in open and close by action of the jack occurs hydraulically over approximately the last 40° degrees of rotation,
before the end of the permitted turning of the jack shaft. Only the speed can be controlled, but not the position when slowdown
starts. Control is by the screws that are incorporated in the jack end castings.
• Turning
clockwise
=
speed is decreased
in slowdown (more slowdown).
• Turning
anticlockwise
=
speed is increased
in slowdown (less slowdown).
Pic. 17
IMPORTANT: it is recommended that ground gate stops be always installed, in opening and
closing, with all the versions of Drive 700.
!
Drive 700 jack
+ slowdown
- slowdown
- slowdown
istr_drive700_GB.ai 11 10/05/2022 15:15:52