9
EngLIsh
Optional Accessories
WARNING:
Since accessories, other than those offered
by FACOM, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only FACOM recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
D
Cleaning
WARNING:
Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
C
Lubrication
Your tool requires no additional lubrication.
MAINTENANCE
Your FACOM hand tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Rivet Application (Fig. A. —E)
1. Select correct rivet length for your application.
2. Ensure the nose piece
3
,
4
,
5
,
6
,
7
matches the size of
the rivet
11
you are operating with.
3. Drill a hole that matches the rivet thickness through the
materials you intend to rivet.
4. Insert the rivet pin
12
into the hole of the workpeice and
ensure the rivet head
13
is flush with the workpeice.
5. With handles
1
in the open postion, place rivet mandrel
15
into the nose piece.
6. Ensure rivet pliers
14
are perpendicular with the workpeice
as shown in Fig. E.
7. Squeeze the handles
1
together to the closed position to
install the rivet to the workpeice.
8. The clipped rivet mandrel
15
falls into the mandrel
storage cup
10
.
9. To empty the mandrel storage cup
10
, unscrew from the
pliers and dispose of rivet mandrels in an appropriate dust bin.
10. Screw the mandrel storage cup onto the pliers until snug.
Stainless Steel
X
X
X
Nose Piece Size Reference Chart
RIVET
MATERIAL
NOSE PIECE SIZE
3/32"
(2.4mm)
1/8"
(3.2mm)
5/32"
(4.0mm)
3/16"
(4.8mm)
1/4"
(6.4mm)
Aluminum
X
X
X
X
X
Steel
X
X
X
X
Proper Hand Position (Fig. A)
WARNING:
To avoid risk of serious injury, ensure both
hands are on the handle grips during operation.
WARNING:
To reduce the risk of serious personal injury,
ALWAYS
hold securely in anticipation of a sudden reaction.
Proper hand position requires both hands on the handle grips
1
.
OPERATION
CAUTION:
Wear safety glasses and gloves
during operation.
Replacing Nose Pieces (Fig. A, C)
1. Select appropriate sized nose piece
4
,
5
,
6
,
7
for the
desired size rivet for your application.
2. Hold the adjustable head with one hand, use the other
hand to turn the nose piece counterclockwise wtih the nose
piece wrench
9
. Remove the installed nose piece from the
adjustable head
2
of the rivet pliers.
3. Start to thread the desired nose piece onto the adjustable
head
2
of the rivet plier.
4. Use the nose piece wrench
9
, and turn the nose piece
clockwise until tight.
5. Keep nose pieces not in use stored safely in the four
nose piece storage holes
8
located on either side of the
handles
1
.
nOTE:
Nose pieces are removed from storage by rotating
the nose piece counterclockwise and installed in the storage
holes by rotating the nose piece clockwise until tight.
Setting the Adjustable Head (Fig. B)
For best results it is important to adjust the head of the rivit
pliers to match the rivet size for your application.
nOTE:
Factory setting is for 1/4" (6.4 mm) rivets.
1. If you want to use 3/16" (4.8 mm) rivets, use the nose piece
wrench
9
to remove the nose piece on the adjustable head
2
.
2. Then rotate the adjustable head
2
180 ° anticlockwise to
use 3/16" (4.8mm) or smaller rivets. Install appropriate nose
piece onto the adjustable head.
3. Rotate the adjustable head
2
180 ° clockwise to use the
factory setting of 1/4" (6.4 mm) rivets.Install appropriate
nose piece onto the adjustable head.
ASSEMBLY AND ADJUSTMENTS
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
Summary of Contents for Y 116C
