42
light to flash for 15 seconds, allowing the user to easily locate the
physical drive within the TerraBlock Server Enclosure. It is
recommended to stop all client activity on the TerraBlock server or it
will be difficult to tell which drive is being located.
The drive you are identifying is immediately below the activity light
that is flashing.
The Locate function only locates drives on the specific
server that the TerraBlock Manager is currently running on.
In a multi-server TerraBlock workgroup, the ‘Locate’ button
will remain grayed out and unavailable if drives from a
different server are selected. In order to easily identify the
drive you are attempting to locate, use the Locate feature
while the TerraBlock Server is idle.
Admin Settings Tab
Launching the TerraBlock Manager on the TerraBlock Server itself will display an
additional ‘Admin Settings’ tab containing a group enhanced features.
The Admin Settings tab will not appear on client workstations, regardless of the user
permissions.
Enable E-mail Notification of TerraBlock errors
The server is able to report any Disk, SMDrive (TerraBlock Server’s service) or SAS
errors to an e-mail address specified in the Admin Settings tab of the TerraBlock
Manager. Enter the e-mail information and select ‘Test E-mail’ to verify your e-mail
information is valid.
