Fac F300 VO L, Use And Maintenance Manual

Page: 29 / 68

29
3
10
10
3
4
F300 VO F300 VO L
Fig. 21
Fig. 20
18
18
IT
EN
• Press the lever (10) and lift the pusher (3).
• Remove the product from the table (4).
• Clean the slicer as described in the relevant section.
The slicer SHOULD be cleaned thoroughly at least once a day and more frequently
where necessary.
Clean the slicer before use if it has been out of service for some time.
WARNING:
Cutting hazard! Use protective cut- and tear-resistant gloves and
perform all operations with extreme care.
PAY ATTENTION AT ALL TIMES!
• Remove the receiving tray (18).
SLICER CLEANING