Fac F300 VO L, Use And Maintenance Manual

Page: 27 / 68

27
0
1
2
3
4
5
6
7
8
9
10
7
6
4
5
7
6
16
Fig. 17
F300 VO L F300 VO
Fig. 17a
IT
EN
DO NOT turn the flywheel (7) anticlockwise.
Serious damage to the slicer could be caused.
• You will need to turn the flywheel (7) 4/5 times before the product touches the blade (16).
• Whilst the carriage (5) moves forward (away from the operator), the blade (16) enters the product.
Guided by the deflector (2), the slice is detached and drops onto the slice receiving surface (1).
• As the carriage (5) returns (towards the operator), a mechanical device is operated that
moves the product holder (4) sideways towards the blade (16).
The value of the transversal advancement is set:
- with the slice thickness adjustment knob (13) (model F300 VO);
- with the lever (13) (model F300 VO L).
• You should stop turning the flywheel (7) once the operation is complete; the blade will halt
its movement (16).