57. Locate FT50401BK Rear Bumpstop Spacer. Position the
spacer onto the factory bumpstop pad on the axle and
attach with the supplied 5/16” x 1” bolts and hardware.
SEE FIGURE 121.
58. Locate FT50298 E-Brake Bracket and supplied ¼”
hardware. Position the bracket to the factory mounting
position and attach with the factory hardware. Attach the
factory bracket to the new Fabtech bracket with the ¼”
hardware. Torque to 10 lbs.
SEE FIGURE 122.
59. Locate & install FT50303 Rear 5” Coil Spring with the
factory isolators on the top into the upper mount first,
then onto the factory coil perch on the axle. (make sure
upper isolator is fully seated into the upper pocket /
mount).
SEE FIGURES 123-124.
60. Position the trac bar into the new trac bar bracket and
attach with the factory hardware. Remove the 9/16” bolt
and install the provided FT157 Sleeve in the factory trac
bar mount. Torque the factory trac bar bolt & new 9/16”
to **184 ft. lbs.
SEE FIGURE 125.
FIGURE 121
FIGURE 122
FIGURE 123
FIGURE 124
FIGURE 125
NEW 9/16”
HARDWARE
FT157 TRAC BAR
SLEEVE
FACTORY BOLT AND
NUT TAB
28 of 31
