61. Install the Fabtech shock FTS6002 (Not included in the
kit) Use the factory upper hardware to mount the bar bin
and the supplied ½” x 2 ½” bolt, large USS washers, and
hardware. (insert one large USS washer per side inside the
shock mount with the shock) Torque the upper hardware
to **60 ft. lbs and the lower to **127lbs.
SEE FIGURES 126-127.
62. Locate FT50295 Rear Brake Line Drop Bracket, supplied
1/4” hardware, and factory rear brake line hardware.
Attach the drop bracket to the factory mount with the
factory hardware. Attach the factory brake line bracket to
the new drop bracket with the ¼” hardware. Torque to **
10 lbs.
SEE FIGURE 128.
63. Reconnect the factory ABS mount to the rear differential
and torque to 20 lbs.
64. Locate the factory end links and hardware. Attach the
links to the outside of the sway bar with the studded end
of the link. Attach the opposite end of the link to the lower
shock bracket on the inside of the mount. Torque the bolts
to **100 ft. lbs.
SEE FIGURES 129-134.
FIGURE 126
FIGURE 127
FIGURE 128
FIGURE 129
1 LARGE USS WASHER
PER SHOCK
UPPER SHOCK
MOUNT / BAR PIN
29 of 31
