Faber FMG3326F-LP, Instruction Manual

Page: 56 / 78

56
Commonwealth of Massachusetts
For all side wall horizontally vented gas fueled equipment
owned or operated by the Commonwealth and where
the side wall exhaust vent termination is less than seven
1. INSTALLATION OF CARBON MONOXIDE
DETECTORS. At the time of installation of the side wall
carbon monoxide detector with an alarm and battery
or hard-wired carbon monoxide detector with an alarm is
or structure served by the side wall horizontal vented
gas fueled equipment. It shall be the responsibility of
licensed professionals for the installation of hard-wired
carbon monoxide detectors
a. In the event that the side wall horizontally vented gas
the hard-wired carbon monoxide detector with alarm and
b. In the event that the requirements of this subdivision
carbon monoxide detector with an alarm shall be
installed.
2. APPROVED CARBON MONOXIDE DETECTORS. Each
carbon monoxide detector as required in accordance with
the above provisions shall comply with NFPA 720 and be
permanently mounted to the exterior of the building at
in line with the exhaust vent terminal for the horizontally
vented gas fueled heating appliance or equipment. The
CLEAR OF ALL OBSTRUCTIONS”.
4. INSPECTION. The state or local gas inspector of the
side wall horizontally vented gas fueled equipment shall
the inspector observes carbon monoxide detectors and
signage installed in accordance with the provisions of
1. The equipment listed in Chapter 10 entitled “Equipment
Not Required To Be Vented” in the most current edition of
NFPA 54 as adopted by the Board; and
2. Product Approved side wall horizontally vented gas
fueled equipment installed in a room or structure
whole or in part for residential purposes.
When the manufacturer of Product Approved side
wall horizontally vented gas equipment provides a
venting system design or venting system components
manufacturer for installation of the equipment and the
venting system shall include:
1. Detailed instructions for the installation of the venting
system design or the venting system components; and
2. A complete parts list for the venting system design or
venting system.
When the manufacturer of a Product Approved side
wall horizontally vented gas fueled equipment does
1. The referenced “special venting system” instructions
shall be included with the appliance or equipment
installation instructions; and
2. The “special venting systems” shall be Product Approved
include a parts list and detailed installation instructions.
Approved side wall horizontally vented gas fueled
instructions shall remain with the appliance or
equipment at the completion of the installation.