Page
29
of
39
CAS1000 – TEST MODE
MASTER SIDE
CAS1000 is connected
to mains power and
water is supplied
O
I
Press switch on (I)
CAS1000 is now in
standby mode
1 Beep
Press the Test Mode
button on the Master
On Board controls
CAS1000 is now in
Test Mode on the
Master side
1 Beep
00 is n
On board controls (Master)
Remote Control
Bluetooth Receiver
To exit Test Mode at any
time, press switch off (O)
and switch on (I)
CAS1000 is in standby mode
1 Beep
On board controls (Slave)
Note: There is a one
second delay between
the master and slave
side. The response to
any commands set by
the receiver or
remote control has a
one second delay on
the slave side.
I
Remove Fuelbed and
set aside
IMPORTANT:
Test Mode has been integrated into this product to improve end-of-line testing during
production and can be used by service Engineers to isolate components for individual
function testing. Test mode should be conducted by trained personnel only. The icons on
the On Board Control buttons do not match the commands they are associated with, when
in test mode.
Summary of Contents for CAS500
Page 1: ......
