Page
17
of
39
CAS500 – REMOVING FUELBED
The CAS500 is switched on and was operating
normally
LEDs on Fuelbed are operating
Remove the unattached log which houses
the LED connection to the jack. See part 1 in
Fig. C
Lift off the Fuelbed as shown in Fig. D and
set aside
Important:
If the product is left switched
on, be aware the heated element and the lit
LEDs are both exposed to the user.
tached
Unplug the jack from the product, see part 2
Fig. C
Fig. C
1
2
Fig. D
Lift off the Metalbed as shown in Fig. E and
set aside
ed as s
Fig. E
Power off the product unless you are
connecting to the remote control or
entering test mode.
Press the standby button on the Bluetooth
receiver, the Remote Control, or switch off
the product at the wall
Product now has Fuelbed removed
On board controls
Bluetooth Receiver
Remote control
Summary of Contents for CAS500
Page 1: ......
