1. The front OEM inner fenders can be reused with a little modification. Using a small reciprocating
saw the plastic can be cut. The profile of the cut can be field determined based on the choice of front
bumper, tire size, and lift options. A suggested cut profile has been included. Figure 1
Installation |
I
nner Fenders
Figure 1
2. Four (4) 5/16” stainless steel self-tapping screws and stainless steel fender washers (50192-HW) have
been provided to aid in the reinstallation of the driver and passenger sides. There are two (2) holes per
side that had a ribbed shank push pin from the factory which the self-tapping screws can be installed
using an impact driver with 3/8” socket. Figure 2-3
Figure 2
