39
5. Using an impact driver with a 3/8” socket, drill one (1) of the provided 5/16” self-tapping screws with
bonded sealing washer (50192-HW) through the hole in the bottom of the lower rocker channel cover
plate. Figure 6
Figure 6
6. Using a 3/16” Allen wrench, tighten the two (2) screws installed previously until the washer starts to
flatten.
Figure 7
7. Place one (1) of the provided nut plates (21402-04) inside of the oval hole in the tubular structure
inside of the fender. Figure 7
