Template Application/
Cutting
Disassemble the vehicle where you
can catalog and store everything.
We suggest labeling and bagging all
the OEM bolts when removing from
the vehicle. Failure to keep track of
parts could lead to an inability to
properly reinstall components.
Organization
We recommend two people
perform the cutting process.
We recommend protecting any
painted surfaces that may come
in contact with the work area with
painters tape.
Assistance
1. Using painters tape, apply at least three (3 layers of tape to
the forward most part of the front door. Figure 1
Figure 1
Figure 2
2. Apply the DS FEN 1 template to drivers’ side front fender by
first aligning the front section with the blue dashed line to the
bottom of the fender near the bumper. Then align the rounded
blue dashed line area of the template with the wheel well edge.
Finally finish applying the template by working the template
upwards away from the wheel well opening. If small bubbles
remain this is fine, it will not affect the functionality of the
template. Figure 2-4
