49
Figure 14
17. Remove the base fender from the vehicle and using a drill with 3/8” bit, drill out the 10 previously
marked holes. Figure 14
Figure 15
18. Using a deburring tool, clean out any sharp edges in the previously drilled holes.
19. Using the provided rust trap coating and brush, (61725) apply a liberal amount to each of the
previously drilled holes in the bed side. Figure 15
Figure 16
20. Using three (3) vise grip c-clamps, reinstall the base fender onto the bed side aligning the holes with
the previously drilled holes. Figure 16
