x 1
x 1
x 1
ENGLISH
9
4.2.3.2 MANUAL SET-UP FOR ROLLER SHUTTERS STARTING FROM THE DOWN TRAVEL STOP SETTING (function available from the software version 4.90)
PRESS THE UP AND DOWN BUTTONS AT THE SAME TIME FOR 1 SECOND, RELEASE THEM FOR 0.5 SECONDS AND
PRESS AND HOLD BOTH BUTTONS PRESSED TILL THE MOTOR MAKES ONE SHORT MOVEMENT IN BOTH DIRECTIONS,
TO CONFIRM THE STORING OF THE UP TRAVEL STOP. THE SET-UP IS ENDED.
Within 1 second
PRESS THE UP OR DOWN BUTTON AND TAKE THE ROLLING SHUTTER TO THE UP TRAVEL STOP
UP TRAVEL
STOP
OR
PRESS THE UP OR DOWN BUTTON AND TAKE THE ROLLING SHUTTER TO THE DOWN TRAVEL STOP, RELEASE THE BUTTON
AND PRESS THE UP AND DOWN BUTTONS AT THE SAME TIME, TILL THE MOTOR MAKES ONE SHORT MOVEMENT IN
BOTH DIRECTIONS.
DOWN
TRAVEL STOP
OR
1) Press the button controlling the lowering and go to the down travel stop and release the button.
2) Press the up and down buttons at the same time till the motor makes one short movement in both directions.
3) Press the up or down button and take the roller shutter to the wished position for the up travel stop; then, release the
button.
4) Press both buttons for 1 second, release them, and
hold them pressed till the motor makes one short movement
in both directions, to check the correct mode setting.
5) Check if the positions of the set travel stops are correct. If the travel stops have not been set correctly, make a reset
and repeat the automatic or semi-automatic set-up procedure.
Summary of Contents for T-MODE TM 45 E
Page 1: ...T MODE TM 45 E TM 58 E...
