17
These instructions apply to the following model:
MASTER-B AND SLAVE-B CONTROL BOARDS FOR DOMO SWING AUTOMATED SYSTEMS
The DOMO automated system consists of non-reversing electro-mechanical linear operators, powered by a 12 Vdc work battery,
each coupled to a control board recharging the battery.
The SLAVE-B equipment (required on 2-leaf gates only) is controlled by the MASTER-B equipment to which all accessories and
pulse generators are connected. The MASTER-B board can be programmed and is used to set the following: function logics, work
times (by self-learning) and pause times, leaf speed, and the sensitivity of the anti-crushing device.
The non-reversing system guarantees the gate will automatically lock when the motor is not operating. A release system enables
the gate to be moved by hand in case of malfunction.
The DOMOSWING automated system was designed and built for controlling vehicle access. Do not use for any other purpose.
MASTER-B AND SLAVE -B CONTROL BOARDS
3.
MASTER-B CARD
TECHNICAL SPECIFICATIONS
Power supply
12Vac
Transformer characteristics
Primary 230 Vac~50/60Hz -
Secondary 12 Vac - 16VA
Accessories max. load at 24 Vdc
150 mA
Rapid connector max load
50 mA
Function logics
Automatic / "Stepped" Automatic /
Safety device / “Stepped” semi-automatic
Opening/closing time
By self-learning
Pause time
Programmable: 5, 10, 20, 30 sec.
Leaf delay time when opening and closing
(op 0s, cl 0s) - (op 2s, cl 2s) - (op 2s, cl 4s) - (op 2s, cl 8s)
Speed
Selectable on 4 levels
Static force adjustment
Selectable on 4 levels
Terminal board inputs
Open - Open released leaf
Stop - Safety devices at opng. - Safety devices at clsng.
Terminal board outputs
Flashing lamp - Motor - Bus -
indicator-light - Accessories
24 Vdc - 12 Vdc power supply
Rapid connector
Minidec cards - RP cards
Programmable functions
Logic - pause time - leaf opening
and closing delay - anti-crushing force - operators speed
Fig. 1
a
Control board
b
Board support
c
Work battery
d
Terminal board (MASTER-B only)
e
Transformer (Optional)
f
Enclosure in class IP 55
1.
DESCRIPTION AND TECHNICAL SPECIFICATIONS
햳
햴
햲
햵
햷
햶
Fig. 2
•
Dimensions in mm
CONTROL BOARD
ENCLOSURE
2.
DIMENSIONS
5.
MASTER-B AND SLAVE-B CARDS COMMON
CHARACTERISTICS
Batteries
hermetic Pb 12Vdc 1.2Ah - dimensions 96x46x50
Use frequency (cycles/hour)
5
(1)
Consecutive cycles
~15
(1)
Battery recharge time
~10' for each completed cycle
(1)
Enclosure protection class
IP 55
Motor max current
15A
Operating ambient temperature
-20°C ÷ +55°C
Protection fuses
N° 1 - 20A
Anti-crushing function
Encoder - Current control
4.
SLAVE-B CARD
TECHNICAL SPECIFICATIONS
Power supply
from Master-B
Terminal board outputs
Motor
Terminal board inputs
Battery - Bus
(1)
The 5 cycles/hour are just a reference value for maintaining full
efficiency of batteries. 15 consecutive cycles can be averagely
performed with charged battery. The recovery time (battery recharge)
is approx. 10' each cycle performed. The consecutive cycles could be
reduced by over 50% at low temperatures (< 0°C).
