Estate Slide E-SL 1200
Standard System
Overview and Safety Zones
The system display to the right is a recommended
standard system. Other approved accessories can
be installed. Photo sensors and a flashing light
indicating gate movement is recommended for
safety purposes.
1
Estate Slide Operator
2
Photocells (not included)
3
Key operated pushbutton (not included)
4
Flashing lamp (not included)
5
433 Receiver
Notes:
1) Do not extend operator connection cables.
2) When laying electrical cables, use appropriate rigid
and/or flexible tube.
3) Do not run any wires in the same conduit as 110 AC
power that may be in the area. This will cause unwanted
interference.
!
IMPORTANT Preliminary Checks:
To ensure safety and an efficiently operating automated system, make sure the following conditions are observed.
The gate and post must be suitable for being automated. Check that the structure is sufficiently strong and rigid,
and its dimensions and weights conform to those
indicated in section 1. In particular, wheel diameter must be in relation to the weight of the gate to be automated.
Dimensions and weight must match those indicated in the technical specifications.
Make sure the leaves move smoothly without any irregular friction during entire travel.
The soil must permit sufficient stability for the expansion plugs securing the foundation plate.
Check if the upper guide and travel limit mechanical stops are installed.
We advise you to have any metalwork carried out before the automated system is installed.
2.1