E145S
5
532369 - Rev.A
1-E145S
dd/mm/yy
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
3. E145S
3.1 INTENDED USE
The FAAC E145S electronic board has been designed
to control actuators (hydraulic or electromechani-
cal) or gearmotors for motorized gates intended for
installation in areas that are accessible to people, the
main purpose of which is to provide safe access for
goods or vehicles or people in industrial, commercial
or residential settings.
!
Any other use that is not expressly specified in
these instructions is prohibited and could affect the
integrity of the product and/or represent a source
of danger.
3.2 LIMITATIONS OF USE
-
The E145S can control one or two 230 V
~
opera-
tors. Mixed configurations are not allowed with
sliding gate gearmotors (e.g. you cannot connect a
sliding gate gearmotor with a swing gate operator).
-
Using the product in any configuration other than
that intended by FAAC S.p.A.is prohibited. It is
prohibited to modify any of the product’s com-
ponents
3.3 UNAUTHORISED USE
-
Do not use on motors or devices that are intended
for purposes other than operating gates.
-
Uses other than the intended use are prohibited.
-
It is prohibited to install the E145S on smoke and/
or fire doors.
-
It is prohibited to install the E145S in environments
in which there is a risk of explosion and/or fire: the
presence of flammable gases or fumes is a serious
safety hazard (the product is not ATEX certified).
-
It is prohibited to power the system with energy
sources other than those specified.
-
It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not envisaged and author-
ised by the corresponding manufacturers.
-
It is prohibited to use and/or install accessories
which have not been specifically authorised by
FAAC S.p.A.
-
It is prohibited to use the E145S in the presence of
faults which could compromise safety.
-
Do not allow water jets of any type or size to come
into direct contact with the E145S.
-
Do not expose the E145S to corrosive chemical or
environmental agents.
3.4 PRODUCT IDENTIFICATION
day/month/year
of construction
identification code
model
Summary of Contents for E145S
Page 1: ...E145S...
