FAAC E124, Manual

Page: 16 / 32

4
ENGLISH
1
ST
LEVEL PROGRAMMING
Display Function
Default
0
Default
1
Default
2
Default
3
Default
4
Default
5
dF
DEFAULT:
0
Configures the parameters with DEFAuLT values
corresponding to an installation with non-FAAC
operators. (see default column 0).
1
Configures the parameters with DEFAuLT values
corresponding to an installation with operators
FAAC 412, 413/415, 770, 390 (see default
column ).
2
Configures the parameters with DEFAuLT values
corresponding to an installation with operators
FAAC 391
(see default column 2).
3
Configures the parameters with DEFAuLT values
corresponding to an installation with operators
FAAC S700H/S800H (see default column 3
.
4
Configures the parameters with DEFAuLT values
corresponding to an installation with operators
FAAC 418 . (see column default 4).
5
Configures the parameters with DEFAuLT values
corresponding to an installation with operators
FAAC S450H (see column default 5).
CU
If the
CU
value appears when you release
the F push-button, this means that a standard
configuration modified by push-buttons and
display was selected. If you wish to maintain this
programming, press push-button F again.
PC
If the
PC
value appears when you release the F
push-button, this means that programming from
the PC was effected with the default password
(0000). By pressing the + and - keys, you can
load a default configuration from among
those listed above. If you wish to maintain
programming from the PC, press push-button F
again.
0 1 2 3 4 5
MO
TYPE OF MOTOR
:
00
non-FAAC operators.
1
operators FAAC 42, 43/45, 770, 390.
2
operators FAAC 39.
3
operators FAAC S700h/S800h.
04
operators FAAC 48
05
operators FAAC S450h
View only parameter, cannot be modified
00 01 02 03 04 05
LO
FUNCTION LOGICS:
E
Semi-automatic.
EP
Semi-automatic “Step by step”.
S
“Safety devices” automatic.
SA
Automatic with in-pause reversing.
SP
”Step-by-step safety devices” automatic.
A 1
Automatic .
A
Automatic.
AP
Automatic “Step-by-step”.
At
Automatic with timer function.
b
Semi-automatic “b”.
bC
Mixed (OP at impulse/CL Dead-man).
C
Dead-man.
CU
Custom.
Other more detailed programming
possibilities are feasible by programming
with a PC (see dedicated instructions).
E E E E E E