![background image](http://html1.mh-extra.com/html/faac/a100-compact/a100-compact_manual_3114570024.webp)
22
ENGLISH
10B INSTALLING THE CABLE RACEWAYS
Install by pressure the cable raceways in the seat of the support
profile as shown in Fig. 35.
12B INSTALLING THE SIDE PANELS AND BRACKETS
To install the side panels and the central bracket (for profiles
of over 3 meters) (fig.36), place 8 plates on the profile of the
support profile. Fit 4 of them on one side of the support profile
and 4 on the other.
Plates for
side panels /
side brackets
Plates for
central
bracket
If you do not wish to install the side panels, install 3 brackets to
secure the housings - two at the sides and one in the centre (for
profiles of over 3 meters), and instead of the 3 side plates, fitting
only one as shown in Fig. 36 ref.
.
Secure the side panels and brackets as shown in chapter 10A of
the assembled automated system installation.
Proceed as described in chapter 9A of the assembled automated
system installation.
11B INSTALLING THE PARACHUTE AND SPACERS
8B ADJUSTING THE BELT FASTENING
Refer to chapter 7A of the assembled automated system
installation.
9B ADJUSTING BELT TENSION
Refer to chapter 8A of the assembled automated system
installation.
fig. 35
fig. 36