![background image](http://html1.mh-extra.com/html/faac/a100-compact/a100-compact_manual_3114570020.webp)
18
230/115
ENGLISH
13A START-UP OF THE AUTOMATED SYSTEM
• Manually check correct sliding of the leaves and of all the
moving elements.
• Carry out/check the electrical connections on the control
board of the power cables coming from the power supply
unit, from the motor, and from all accessories, consulting the
instructions of the control board.
• Use the raceways - suitably positioned (Fig. 29 ref.
and
)
- to route the cables inside the support profile, thus preventing
them from coming into contact with moving parts.
• Set motor rotation direction according to type of door (refer
to the control board instructions).
• Connect the 115V/230V~ power plug in the specific
connector of the power supply unit (Fig. 29 ref.
).
Check if the switch in fig. 29 ref.
is correctly posi-
tioned (230V~/115V~).
• Check the efficiency of all installed accessories, especially
photocells and sensors.
Fuse
5x20 T2,5A/250V
fig. 29