![background image](http://html1.mh-extra.com/html/faac/a100-compact/a100-compact_manual_3114570018.webp)
16
ENGLISH
11A INSTALLING THE CLOSING HOUSING
• Lay the closing housing on the spacers you had previously
mounted, as shown in Fig. 26
or
.
• To keep the housing open, lift it (Fig. 26 ref.
) and push it
(Fig.26 ref.
) toward the profile until the metal protrusion fits
in the profile seat.
• Secure the parachute cables in the appropriate seats (Fig. 26
ref.
)
• The closing housing is locked in line with the two side panels
or the securing brackets (Fig. 26 ref.
)
• The closing housing is pre-marked to adapt it to different leaf
thickness values. Eliminate excess profile by cutting at the
points indicated in fig. 26 ref.
.
If you are using the internal release, in order to close
the housing correctly, drill a hole near the release
knob as shown in paragraph 16B.
fig. 26