22
ENGLISH
Table 2: Technical specifications of 960MP Electronic Control
Unit + 961 B-E Programming unit
Power supply
230 Vac (+6 -10%) - 50 (60) Hz
Accessories power supply
24 Vdc / 500 mA max.
Electric lock power supply (N.O./N.C.)
24 Vdc / 0.5 A max.
Standard operating functions (switch)
Open / Automatic / Manual
(Night)
Adjustable functions (trimmer)
Opening speed - Closing speed
Pulling force - Pause time
Selectable functions (microswitches)
Overclosing stroke
Standard/non-standard initialisation procedure
Push and Go - Function switch (pos. “0”)
Terminal strip outputs
Door open/closed signal -
Malfunction alarm signal-
24 Vdc electric lock power supply
(N.O./N.C.) - 24 Vdc accessories power supply -
Presence signal (gong) - PC connection signals -
“Interlock” signals - “Double leaf door” signals
Terminal strip inputs
Function switch/CODIS (optional) -
Internal / external / emergency /
STOP safety device / CLOSURE safety device
1.1 APPLICATION LIMITS
Important
: To ensure correct application of the FAAC 961 B-E
unit the weight of the door must not exceed the value given in
Table 3 corresponding to its length.
The maximum length of the leaf is 1400 mm.
The values of maximum weight vary according to the driving
arm used.
For each driving arm there is also a different maximum value for
the depth of the doorpost (Table 4) beyond which it is not
possible to install the system correctly.
Table 3: Application limits of 961 B-E automatic unit
700
367
286
-
750
320
249
-
800
281
219
-
850
249
194
194
900
222
173
173
950
199
155
155
1000
180
140
140
1050
163
127
127
1100
149
116
116
1150
136
106
106
1200
125
97
97
1250
115
90
90
1300
107
83
83
1350
99
77
77
1400
92
71
71
Table 4: Max. depth of doorpost
mm
FAAC 961 B-E
The 961 B-E automatic unit for swing doors is a one-piece unit
consisting of an electromechanical device that allows door
opening to be controlled by means of a driving arm. The door
is re-closed by a spring system.
The operator can be installed either on the lintel or on the door
structure itself.
The stainless steel protective casing houses the electronic
control unit used to program and control the operation of the
system.
In the event of a power failure the door can be pushed (or
pulled) open manually.
1. DESCRIPTION AND TECHNICAL CHARACTERISTICS
Sliding arm
0 - 125
126 - 250
0 - 160
0 - 160
Pulling
articulated
arm
Pushing
articulated
arm (Var. 02)
Table 1: Technical specifications of 961 B-E Operator
Power supply
230 Vac (+6 -10%) - 50 (60) Hz
Absorbed power
100 W
Current drawn
0.5 A
Electric motor
24 Vdc with encoder
Dimensions
530 x 100 x 104 (length x height x depth)
Weight
10 kg
Ambient temperature
-15 +70
°
C
Housing protection
IP 23
Dimensions and max. weight of leaf
see Table 3 (section 1.1)
Duty cycle
continuous
Operation in event of power failure
Manual push/pull opening -
Spring closure
Configuration of driving arms
• pushing articulated arm
(version for jamb depth 0-125 mm)
• pushing articulated arm - (version for jamb depth
126-250 mm) • pulling articulated arm • sliding arm
Anti-crushing device
standard
Opening angle
70-95
°
Opening time
3.5 - 10 s (adjustable)
Closing time
6 - 13 s (adjustable)
Max. weight of leaf
(kg)
Pulling articulated
arm
Max. weight of leaf
(kg)
Sliding arm
Pushing
articulated
arm (Var. 01)
3
1
2
6
7
13
12
11
10
9
8
5
4
a
Cable hole
b
Support profile
c
960 MP electronic control unit
d
Position monitoring microswitch
e
Spring loading adjustment screw
f
Transmission shaft
g
Drive system
h
DC motor
i
961 B-E programming unit
j
Closing spring
k
Protective casing
l
Operating function switch
m
End cover (2)
Fig. 1
Length of leaf
(mm)
Max. weight of leaf
(kg)
Pushing articulated
arm
