F5 FirePass, Administrator'S Manual

Page: 130 / 182

Chapter 5
5 - 6
• If you use MyDesktop, you must have exactly one service configured to
allow Desktop Agents to communicate with the FirePass server.
• If you have a clustered or failover configuration, you must have at least
one service configured for use by the Synchronization Agent.
To configure Web Services
To configure services, navigate to Server/Maintenance/Network
Configuration/Web services.
The currently-configured services are presented there in a read-only table.
For each service, you can see all of the configuration details. Most are
self-explanatory. The “Services” column should contain one or more of
these codes.
To add a service
To add a new service, start at the Add new service region below the table.
1. Select the service's IP address from the list of addresses configured
for this server, and specify the port to use for this service in the Port
box.
2. Assign a name to the service, or specify the fully-qualified domain
name of an Apache server listening on this port.
3. Click the SSL check box to specify encrypted communications
(imperative for services involving access from outside the Firewall;
optional elsewhere).
4. Click the Add New button. The new service now appears on the
Configured Services table. Configure it according to the following
instructions.
Code Meaning You must have
U Configured to allow user
access At least one
A Configured to allow
administrator access At least one
D Configured as the Desktop
agent port Exactly one
S Configured as a
synchronization port At least one, if you have failover or
clustering configured
Table 5.1 Web services codes and rules