F5 BIG-IP 10000 Series, Platform Manual

Page: 17 / 68

2. Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
3. Display the current status of a specific interface.
show interface <interface_key>
This is an example of the output that you might see when you run this command on interface 1.1:
-------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Pkts Pkts Drops Errs Media
In Out In Out
-------------------------------------------------------------
1.1
up 5.9T 0 7.3G 0 7.3G 0 10000SR-FD
Viewing the status of all interfaces using tmsh
You can use
tmsh
to view the status of all interfaces on the platform.
1. Open the TMOS Shell (
tmsh
).
tmsh
2. Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
3. Display the current status of all interfaces.
show interface
This is an example of the output that you might see when you run this command:
----------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Pkts Pkts Drops Errs Media
In Out In Out
----------------------------------------------------------------
1.1
up 5.9T 0 7.3G 0 7.3G 0 10000SR-FD
1.2 miss 0 0 0 0 0 0 none
1.3 miss 0 0 0 0 0 0 none
1.4 miss 0 0 0 0 0 0 none
1.5 miss 0 0 0 0 0 0 none
1.6 miss 0 0 0 0 0 0 none
1.7 miss 0 0 0 0 0 0 none
1.8 miss 0 0 0 0 0 0 none
1.9 miss 0 0 0 0 0 0 none
1.10 miss 0 0 0 0 0 0 none
1.11 miss 0 0 0 0 0 0 none
1.12 miss 0 0 0 0 0 0 none
1.13 miss 0 0 0 0 0 0 none
1.14 miss 0 0 0 0 0 0 none
1.15 miss 0 0 0 0 0 0 none
1.16 miss 0 0 0 0 0 0 none
1.17 uninit 0 0 0 0 0 0 none
1.18 uninit 0 0 0 0 0 0 none
1.19 uninit 0 0 0 0 0 0 none
1.20 uninit 0 0 0 0 0 0 none
1.21 uninit 0 0 0 0 0 0 none
1.22 uninit 0 0 0 0 0 0 none
1.23 uninit 0 0 0 0 0 0 none
1.24 uninit 0 0 0 0 0 0 none
17
Platform Guide: 10000 Series