F.u.n.k.e. F10185, Installation & Operation Manual

Page: 49 / 81

FSG 90 System
5 SET-UP Procedure
December 2014 FAV_D10024
43
5.4.4 Adjusting the Sidetone volume
IMPORTANT!

Sidetone audible during transmit is only possible via headphones (if
applicable set maximum volume at the headset)

During this adjustment the transmitter is active. Carry out adjustment
quickly!

The microphone(s) sensitivity has to be adjusted properly (refer to
section 5.4.2)
The display shows in the upper line alternately »SET« and »SIDE« .
Press and hold PTT key. Talk in a loud, clear voice with the
microphone one or two inches from your lips.
While talking adjust with the
F/CH
knob a convenient headphone
volume. The segments show the actual range. If more than four
segments are shown overmodulation occurs.
Release PTT key.

Confirm your adjustment by pushing the
STO
button!

If you want to carry on with the SET-UP procedure push once or
repeatedly the
MD
button till the desired menu appears.
5.4.5 Adjusting the headset volume
IMPORTANT!

Receiving is possible via loudspeaker and headphone.

First set with the
ON/OFF-VOL
knob loudspeaker volume to a convenient
level, and then adjust with the SET-UP procedure a suitable headphone
volume.
The display shows in the upper line alternately »SET« and
»PHONE« .
With the speaker, noise or communication is audible.
With the
ON/OFF-VOL
knob set speaker output to a convenient level,
leave
ON/OFF-VOL
knob as it is.
Put on headphone.
By rotating the
F/CH
knob adjust headphone level to a suitable
volume. The dashes show the range.
If the adjustment range is not sufficient increase or decrease with the
ON/OFF-VOL
knob.

Confirm your adjustment by pushing the
STO
button!

If you want to carry on with the SET-UP procedure push once or
repeatedly the
MD
button till the desired menu appears.