F.u.n.k.e. F10185, Installation & Operation Manual

Page: 51 / 81

FSG 90 System
5 SET-UP Procedure
December 2014 FAV_D10024
45

If further memory channels should be deleted adjust with the
F/CH
knob the channel memory number concerned and delete each by
pushing the
STO
button.

If you want to carry on with the SET-UP procedure push once or
repeatedly the
MD
button till the desired menu appears.
5.4.8 Selecting AF EXTERNAL via A/C speaker (ON/OFF)
IMPORTANT!

Always switch OFF AF EXTERNAL ("0") when the radio
FSG 90(X)
is
battery powered. It saves approximately 30 mAmps.
The display shows in the upper line alternately »SET« and
»AF - E« , in the lower line »0« or »1« .
Adjust by rotating the
F/CH
knob the lower line to "0".
0 = AF EXTERNAL OFF, AF external only audible via headphones
1 = AF EXTERNAL audible via aircraft speaker

Confirm the adjustment by pushing the
STO
button, if required!

Carry on with the SET-UP procedure by pushing once or
repeatedly the
MD
button till the desires menu appears.
5.4.9 Selecting 'CHANNEL MODE ONLY' or 'NO RESTRICTION'
IMPORTANT!

For certain applications (usually ground operation only) free selection of
all frequencies by the operator may be restricted. Then transmitting and
receiving is only possible in the
CHANNEL MODE , pre-programmed
before by authorized personnel.
The display shows in the upper line alternately »SET« and »FREQ« ,
in the lower line »0« or »1« .
Adjust by rotating the
F/CH
knob lower line to "0" or "1".
0 = Standard operation, free frequency selection, no restriction.
1 = CHANNEL MODE only , no other frequencies/channel
names adjustable by operator.

Confirm your adjustment by pushing the
STO
button!

Carry on with the SET-UP procedure by pushing once or
repeatedly the
MD
button until the desired menu appears.