FSG 90 System
5 SET-UP Procedure
40
FAV_D10024
December 2014
5.2 Calling SET-UP with password
Calling the SET-UP procedure with password must be carried out at radios, which are
protected by a password against unauthorized changes of the SET-UP adjustments.
Turn OFF the radio (
ON/OFF-VOL
knob fully ccw).
PUSH AND HOLD both
MD
and
STO
buttons
, then turn
ON
the radio (rotate
ON/OFF-VOL
knob clockwise, approximately mid position).
All segments of the display appear for a short moment then the display gets blank.
Release the buttons.
After releasing the buttons the display shows in the upper line
alternately
»FSG90«
and
»SET-UP«
, in the lower line
5 dashes.
If there is no activity for 60 seconds the radio returns to the mode
used before.
With the
F/CH
knob set the first digit of your password (the first
dash changes to digit). Confirm the first digit by pushing the
F/CH
knob. The second digit is ready to be adjusted.
With the
F/CH
knob set the second digit of your password (the
second dash changes to digit). Confirm the second digit by
pushing the
F/CH
knob.
Continue until all five digits of your password are entered.
Confirm the last digit input by pushing the
STO
button. This will
open the SET-UP menu to adjust the squelch threshold.
Repeatedly pushing the
MD
button will open all other set-up
menus in the order described before.
Entering a wrong password will return the SET-UP to the initial
status (5 dashes).
After the fourth attempt to open the SET-UP with a wrong
password the radio returns to the operating mode used before
trying to open the SET-UP. The
FSG 90(X)
is operational.
5.3 Interrupt the SET-UP procedure
The SET-UP procedure may be interrupted any time:
Usually by turning OFF the power (
ON/OFF-VOL
knob fully ccw). All changed and
individually stored adjustments (by pushing the
STO
button) are permanently stored
and effective after turning ON the radio again.
or by pushing the
Transfer button
(
). The radio returns to the operating mode used
before. All changed and individually stored adjustments up to now (by pushing the
STO
button) are permanently stored and effective.
Summary of Contents for F10185
