F.u.n.k.e. F10185, Installation & Operation Manual

Page: 52 / 81

FSG 90 System
5 SET-UP Procedure
46
FAV_D10024 December 2014
5.4.10 Selecting 'TRANSMITTER BLOCKING' during receive (ON/OFF)
IMPORTANT!

Whenever 'Transmitter Blocking' is ON and squelch is ON, transmitting is
disabled as long as the frequency/channel name is busy (communication
audible).During that, no Sidetone is audible, even if PTT is pressed and
one is talking into the microphone.

Whenever the squelch is OFF 'Transmitter Blocking' is OFF and
transmitting is possible even on a busy channel.
The display shows in the upper line alternately »SET« and »BLOC« ,
in the lower line »0« or »1« .
Adjust by rotating the
F/CH
knob the lower line to »0« or »1« .
0 = 'Transmitter Blocking' is OFF. Transmitting is always
possible, even on a busy channel.
1 = 'Transmitter Blocking' is ON. With squelch ON transmitting is
only possible on a free channel.

Confirm your adjustment by pushing the
STO
button!

Carry on with the SET-UP procedure by pushing once or
repeatedly the
MD
button till the desired menu appears.
5.4.11 Service (ON/OFF)
IMPORTANT!

For approved Avionics Shops only!
The display shows in the upper line alternately »SET« and »SERV« ,
in the lower line »0« .
0 = STANDARD MODE, Service OFF.

If required, confirm adjustment by pushing the
STO
button!

Carry on with the SET-UP procedure by pushing the
MD
button.
5.4.12 Optional module (ON/OFF)
IMPORTANT!

Not applicable with this radio.
The display shows in the upper line alternately »SET« and »OPTI« ,
in the lower line »0« .
0 = STANDARD MODE, Optional module OFF.

Carry on with the SET-UP procedure by pushing the
MD
button.