TRT800H / P/N 800ATC-H-(26x)-(26x)
Operation and Installation
37
Document-No: 03.2126.010.71e / Revision: 1.00
4.5.1 Setup Menu Control
In order to access the functions described in the following paragraphs
push and hold
ID in Standby mode. Release
ID if desired counter
value/ menu name is displayed to enter the menu. The following menu
entries are selectable:
Count Displayed Name
Function
0..3
FID
FID is displayed
4..8
CHANGE FID
Enter FID setup page
9..13
SHOW SETUP
Enter setup summary listed on different
pages (no changes possible)
25..28 ENTER SETUP
Enter transponder general configuration
pages
31..34 ALTITUDE
CORRECTION
Enter altitude correction menu
4.5.2 Transponder configuration/record structure
Aircraft related parts of transponder configuration are stored in one out of
eight possible records (record=presetting). Each record contains the
following information:
•
Aircraft Address (AA, 24bit)
•
Aircraft category (AC)
•
Flight identification (FID, 6-8 numbers/letters)
•
RS-232 Interface setting (eg. GPS protocol)
•
Ground-Switch setting (Installed Yes/No)
•
Speed category (RI) of the respective aircraft
•
Remote Header setting (Installed Yes/No)
User related settings (e.g. squawk codes, display contrast) are stored
once in one global record (transponder internally) .