TRT800H / P/N 800ATC-H-(26x)-(26x)
Operation and Installation
16
Document-No: 03.2126.010.71e / Revision: 1.00
•
Display Standby Squawk:
Press
VFR or
▼▲
or use the
rotary knob (the VFR-
Squawk remains active!)
Example:
VFR
VFR
•
Now the Standby Squawk can be adjusted by using the
rotary
knob and activated with
▼▲
.
•
In order to store the current active Squawk as new VFR-Squawk
(replacing the factory setting 7000):
Press and hold
VFR until an „S“ is indicated (approx. 3 s); after
releasing the button „VFR“ is shown
2.9 ID – Special Position Identification (SPI): “Squawk
Ident”
Press ID to activate transmission of the special position identification
pulse with every reply within 18 seconds; “IDT” appears on the display
By pressing
ID a special position identification pulse (SPI) is
transmitted with every reply within 18 seconds, which causes an
accented marking on the Controller’s screen. The „Special Position
Identification“ has to be activated after the „Squawk Ident“ request of the
Controller.
2.10
Error-Codes
Please refer to 2.3 Display - Indications for possible displayed errors.
7000
FL 030
STBY 4700
7000
FL 030
STBY VFR
4700
FL 030
STBY 5600
