TRT800H / P/N 800ATC-H-(26x)-(26x)
Operation and Installation
38
Document-No: 03.2126.010.71e / Revision: 1.00
4.5.3 Transponder configuration/record handling
At least one record is stored in external memory. Up to 8 records can be
additional be applied during setup process.
If more than one record is applied, the active record must be selected out
of a list (determined by FID) during start-up of the transponder.
Previously applied records can be deleted again by filling FID with zero’s
only.
4.5.4 General Setup
Step
Display (Example)
1. Start-up Transponder
2. Ensure, the transponder-mode is
„STBY“. If necessary change the
mode by pressing
MODE
3. Press
ID
A counter is shown at the upper-right
corner. Hold
ID till “ENTER
SETUP” is displayed.
4. After release of
ID the first setup
menu is displayed
Any menu item can be passed by
MODE. If no changes
are made the original settings will remain stored.
Modification of one menu item does not impact the others.
No entries will be deleted.
AA :
EF123456
AC : 18
FID:
ABCDEFG
next
ENTER SETUP 26
2000
FL 030
STBY 7000
