www.ffgroup-tools.com
RD 450 EASY
English |
5
www.ffgroup-tools.com
power tool is guided more secure with both hands.
h
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock;
damaging a gas line can result in an explosion; pene
-
trating a water pipe will cause property damage or an
electrical shock).
h
Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely
than by hand).
h
Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert can
jam and lead to loss of control over the power tool.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine's rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If an
extension lead is required, use an approved and com
-
patible lead rated for this appliance. Follow all the
instruction supplied with the extension lead.
*Double insulated
: This product requires no earth
connection as supplementary insulation is applied
to the basic insulation to protect against electric
shock in the event of failure of the basic insulation.
GUIDELINES FOR USING EXTENSION CORDS
h
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line volt
-
age resulting in loss of power and overheating.
h
Always replace a damaged extension cord or have it
repaired by a qualified person before using it.
h
Protect your extension cords from sharp objects, ex
-
cessive heat and damp/wet areas.
h
Use a separate electrical circuit for your tools. This
circuit should be protected with the appropriate
time-delayed fuse. Before connecting the motor to
the power line, make sure the switch is in the OFF po-
sition and the electric voltage is rated the same as the
voltage stamped on the motor nameplate. Running
at a lower voltage will damage the motor.
PRODUCT
SPECIFICATIONS
INTENDED USE
The machine is intended for drilling in wood, met-
al, ceramic and plastic. Machines with electronic
control and right and left rotation are also suit-
able for screwdriving.
TECHNICAL DATA
Article number
41340
Model
RD 450 EASY
Rated voltage
V
220-240
Hz
50/60
Rated Power Input
W
450
No-load speed
min
-1
0-2.700
Chuck Capacity
mm
0,8 - 10
Weight
kg
1,4
Max. drilling diameter:
Steel
mm
10
Wood
mm
20
Sound emission values determined according to
EN 60745-1
Typically the A-weighted noise levels of the product are:
Sound pressure level
dB(A)
96,0
Sound power level
dB(A)
107,0
Uncertainty K
dB
3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to EN
60745-1
Vibration level max:
a
h
m/s
2
7,37
K
m/s
2
1,5
IDENTIFICATION
1.
On/Off switch
2.
Lock-on button for On/Off switch
3.
Speed preselection
4. Rotational direction switch
5. Keyless chuck
CHANGING THE TOOL
Wear protective gloves when changing the
tool. The drill chuck can become very hot
during longer work periods.
h
Hold the rear sleeve
(07)
of the keyless chuck
(05)
tight and turn the front sleeve
(06)
in rotation direc-
tion
(c)
, until the tool can be inserted.
h
Insert the tool.
h
Hold the rear sleeve
(07)
of the keyless chuck
(05)
tight and firmly turn the front sleeve
(06)
in rotation
direction
(d)
by hand until the locking action is no
longer heard. This automatically locks the drill chuck.
h
The locking is released again to remove the tool when
the front sleeve
(06)
is turned in the opposite direc-
tion.
SCREWDRIVER TOOLS
When working with screwdriver bits, a universal bit
holder should always be used. Use only screwdriver
bits that fit the screw head.
OPERATION
REVERSING THE ROTATIONAL DIRECTION
The rotational direction switch
(04)
is used to
reverse the rotational direction of the machine.
However, this is not possible with the On/Off
switch
(01)
actuated.
Right rotation:
For drilling and screwing in screws,
push the rotational direction switch
(04)
toward
the left.
Left rotation:
For loosening and unscrewing
screws and nuts, push the rotational direction
switch
(04)
toward the right.
SWITCHING ON AND OFF
h
To start the machine, press the On/Off switch
(01)
