F.F. Group GLM 46/201 SP PRO Original Instructions Manual Download Page 8

|   English

8

GLM 46/201 SP PRO | GLM 53/201 SP VS PRO | GLM 53/201 SP PRO

ENGLISH

GENERAL SAFETY WARNINGS

Read and understand this owner’s manual before oper

-

ating this unit. You can help prevent accidents by being 

familiar with your product’s controls and by observing 

safe  operating  procedures  and  safety  signs.  Do  not 

expose the unit to excessive moisture, dust, dirt or cor

-

rosive  vapors.  Never  attempt  to  modify  the  product. 

Always use your common sense to avoid all situations 

considered beyond your capability. Do not use the unit 

while you are tired or under the influence of drugs, alco

-

hol or any other medication. Keep children and bystand

-

ers away while operating. Never allow children or people 

unfamiliar with these instructions to use the machine. 

Local laws can restrict the minimum age of the opera

-

tor. Bear in mind that the operator or user is responsible 

for accidents or unexpected events occurring to other 

people or their property. Consult your authorized dealer 

for disassembly and service, not covered in this manual.

CARBON MONOXIDE HAZARDS

Operate only outdoors. Never run the engine in

-

doors as it exhausts poisonous carbon monoxide, 

an  odorless  and  colorless  gas.  Inhaling  carbon 

monoxide will cause nausea, fainting or death.

FIRE AND BURN HAZARDS 

Do not use in areas with high risk of fire. The exhaust 

system gets hot enough to ignite flammable materials. 

Some  parts  of  the  unit  become  very  hot  during 

operation and you should pay attention not to 

touch them in order to avoid getting burned. Let 

it cool before storing it.

Never  smoke  near  the  unit.  Potential  sources  of 

fire  or  spark  should  be  kept  away.  Pay  attention 

to  fire  hazards  when  refueling  the  unit.  If  a  fire 

occurs, use an appropriate fire extinguisher espe

-

cially designed for oil and gasoline fire.

FUEL AND OIL HAZARDS 

Gasoline and oil are toxic and flammable. Follow the in

-

structions provided by each manufacturer before use. 

Make  sure  that  there  is  some  distance  between 

any  spare  gasoline  tank  and  the  unit,  to  prevent 

unnecessary  danger.  Refuel  only  outdoors  in  a 

well-ventilated  area  with  the  engine  off.  Do  not 

refuel  during  operation.  Do  not  overfill  the  fuel 

tank.  Never  smoke  near  gasoline.  Keep  sources 

of  fire  and  spark  away.  Always  store  gasoline  in 

approved  containers.  Make  sure  that  any  and  all 

spilled  fuel  and  oil  has  been  wiped  off  before 

starting the engine. 

Slowly  open  the  fuel  tank  to  allow  the  pressure 

inside to decrease gradually.

PROTECTIVE EQUIPMENT 

Always wear appropriate and certified protective 

equipment when operating the unit. Always wear 

adequate clothing which does not hamper move

-

ments  when  using  the  machine.  Always  wear 

protective  gloves,  goggles,  helmet  and  relative 

equipment, half-mask respirator, acoustic protec

-

tion equipment and anti-shear safety boots with 

non–slip  soles.  Never  wear  scarves,  shirts,  neck

-

laces  or  any  hanging  or  flapping  accessory  that 

could  catch  in  the  machine.  Tie  up  your  hair  if  it 

is  long.  A  breathing  mask  should  be  used  when 

there is a risk of dust.

CATEGORY SAFETY WARNINGS

SAFE OPERATION

The brake and clutch levers must move freely, they 

must not need forcing and should return automat

-

ically and rapidly back to the neutral position. The 

engine stop switch, choke and speed levers (where 

applicable)  must  easily  move  from  one  position 

to  the  other.  The  electric  cables  and  in  particular 

the spark plug cable must be in perfect condition 

to avoid the generation of any sparks, and the cap 

must be correctly fitted on the spark plug. The ma

-

chine  handgrips  and  protection  devices  must  be 

clean and dry and well fastened to the machine.

Do  not  mount  equipment  or  accessories  on  the 

machine  not  foreseen  or  approved  by  the  man

-

ufacturer.  Non-authorized  modifications  and/or 

accessories can result in serious personal injury or 

the death of the operator or others. 

Make sure that you stop the engine: 

 

f

When mounting or removing accessories.

 

f

Whenever you leave the machine unattended.

 

f

During refueling.

 

f

When emptying the grass bag.

 

f

When moving between work areas or above paved 

areas and ground obstacles. 

WARNING:

  Rotating  parts  can  cause  serious  injury, 

avoid contacting the rotating parts when they are still in 

rotation. Never put your hands or feet underneath the 

chassis of the lawn mower while the engine is running 

and always walk behind the lawnmower.

WARNING:

 If something breaks or an accident occurs 

while  working,  turn  off  the  engine  immediately  and 

move  the  machine  away  to  prevent  further  damage. 

In  case  foreign  body  has  entered  the  machine,  stop 

the machine immediately, inspect for any damage and 

make repairs before starting it again.

The noise and vibration levels shown in these instruc

-

tions are the maximum levels for use of the machine. 

Insufficient maintenance has a significant impact on 

vibration  and  noise  emissions.  Consequently,  it  is 

necessary to take preventive steps to eliminate pos

-

sible damage due to high levels of noise and stress 

from  vibration.  Maintain  the  machine  well,  wear 

ear protection devices and take breaks while work

-

ing. Operating the machine with a stable speed and 

griping  the  handles  firmly  with  suitable  force  can 

decrease  the  vibration  level.  During  a  working  day, 

you shall take frequent and adequate breaks to pre

-

vent damage from vibration and damage to the ears. 

Prolonged exposure to vibrations can cause injuries 

and neurovascular disorders (also called “Raynaud’s 

syndrome”  or  “white  hand”),  especially  to  people 

suffering from circulation disorders. The symptoms 

can  regard  the  hands,  wrists  and  fingers  and  are 

shown  through  loss  of  sensitivity,  torpor,  itching, 

pain and discoloring of or structural changes to the 

skin. These effects can be worsened by low ambient 

Summary of Contents for GLM 46/201 SP PRO





















































Reviews: