F.F. Group 42 413, Original Instructions Manual

Page: 13 / 52

ELM 34/1400 PLUS
www.ffgroup-tools.com
English | 13
lates in the bag.
2. When the grass bag reaches its maximum capac-
ity, the grass indicator flap will remain closed
(l2) (due to the restricted air flow). This signals
that it is time to empty the bag.
MOWING TIPS (M)
For best results cut your lawn in alternative direc-
tions switching direction each time you cut. Cut
your lawn at an equal and same height. Slightly
overlap your cutting lines.
MAINTENANCE
WARNING! Before cleaning, repairing, or in-
specting the lawn mower, disconnect the
power supply to the unit and verify that all
moving parts have come to a complete stop.
GENERAL
f
Always keep the lawn mower clean and free of grass,
dirt, or other debris.
f
Keep the handles dry, clean, and free of oil and grease.
f
After each cutting session, remove accumulated
grass clippings and debris using either a dry cloth or
hand brush. You may also clean the equipment with
a damp cloth. Do not use cleaning agents or harsh
solvents as they may damage the equipment’s plastic
components. Make sure that no water penetrates the
equipment’s interior as intake of water can destroy the
switch/plug mechanism and the electric motor.
f
Do not clean the lawn mower with running water,
particularly with high-pressure water.
f
Check all nuts, bolts, and screws for proper tightness
before each use.
f
Frequently inspect the grass collection bag for signs
of wear and replace immediately with a genuine part
if damage is found.
f
Replace excessively worn or damaged parts imme-
diately.
LUBRICATION
All of the bearings in this product are lubricated with
a sufficient amount of high grade lubricants for the
life of the unit under normal operation conditions.
Therefore, no further lubrication of the bearings is
needed.
AT THE BEGINNING AND END OF EACH MOW-
ING SEASON:
ƒ
Lubricate the springs on the rear discharger door
with light oil.
ƒ
Remove the blade and the blade rotor assembly
and lubricate the motor shaft with light oil or
engine oil. See Blade Replacement section for in-
structions.
BLADE MAINTENANCE
IMPORTANT! The mower blade is sharp and
can cause severe personal injury if handled in-
correctly. Wrap the blade or wear protective
gloves, and use extra caution when handling.
The steel blade is designed to provide a fine
cut in long or tough grass. Deterioration in the
quality of cut indicates blade wear or damage.
WARNING! An excessively vibrating lawn
mower indicates that the blade is not prop-
erly balanced or has become deformed from
striking an object. In this case, the blade must be
repaired or replaced. Please follow the proper
maintenance procedures for blade care or call
the service center.
BLADE REPLACEMENT (N)
WARNING! Wear heavy duty gloves when
handling the blade.
IMPORTANT! Only use original replacement
parts specified for this lawn mower.
1. Disconnect the electrical supply to the lawn
mower.
2. Turn the lawn mower on its side to expose the
underside of the blade housing.
3. Wear heavy-duty gloves, or use a cloth to grip
the blade.
4. To remove the blade bolt (n1) , hold the blade
firmly by one hand, and use a spanner wrench
(n2) to loosen the blade bolt by turning it coun-
terclockwise.
5. Fit the new blade, the washer and the bolt back
on following the same steps in reverse order.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.