F.Bertazzoni REF75PIXL, User Manual

Page: 43 / 184

www.universal.bertazzoni.com www.universal.bertazzoni.com
EN
17
Why does the ice have a strange odour?
Ice is a porous material which can absorb odours
from the surrounding environment. Any ice cubes
which remain in the container for a long period can
absorb such odours, stick together, and shrink.
It is recommended to discard this ice.
Other methods for preventing odours from
occurring:
> Clean the ice container with hot water every so
often. Check that the ice dispenser is switched off
before cleaning the container. Rinse thoroughly and
dry with a tea towel.
> Check whether the freezer contains food which
has gone off or passed its use-by date. To prevent
the build-up of odours, strong-smelling foods
should be kept in air-tight boxes.
> The water filter may be replaced on some models.
> In some cases, the quality of the home's water
supply must be checked.
Operational Noises
Normal Noises
> Hum: the refrigeration system is running. The air
recirculation system fan is operational.
> Gurgling, rumbling and humming: these sounds
are caused by the refrigerant flowing through the
lines.
> Click: the motor switching on or off. The water
connection valve opening or closing.
> Gentle noise: ice cubes falling into the tray.
The appliance is powered by two
independent compressors. It is therefore
normal for one of the two compressors to
be operational at all times.
Warning
Never place bottles or foodstuffs in the ice
tray to cool them down quickly, in order to
prevent blockages or damage to the Ice
Maker.
7.2 Water Filter
Reset the water filter
in the menu, or press
and hold the Enter
button for five
seconds.
The Water Filter guarantees high-quality water for
the production of ice cubes, for a total of 3,000 litres
over a maximum time of 12 months.
When it is exhausted, the message ‘Replace Filter’
will appear on the display.
Filter Change
The filter is located behind the frosted glass in the
upper section of the refrigerator.
Before changing the filter, disable the Ice Maker by
pressing the Ice Maker button.
Pull both levers on the front part of the glass to
release the locking mechanism, then pull the
glass downward before carefully rotating the filter
cartridge a quarter-turn to the left before removing
it from its seat.
It is normal for a small quantity of water to leak out.
Remove the cap on the new cartridge and insert it
in its seat, then gently give it a quarter-turn to the
right to lock it into position.
Then access the Menu and select the “Manual
Clean” function. At the end of the cleaning cycle,
remove the water from the ice container and dry it.
7.3 Water Filter for Freezer
column Ice Makers
Column freezers equipped with automatic ice
makers include an externally mounted water filter
kit.
The water filter manifold and water connections
must be plumbed in before final positioning of the
refrigerator.
The water connection connecting the rear of the
appliance to the filter kit must be in position before
installing the unit.
The filter kit must be installed in an accessible
position (such as an adjacent or underlying cabinet)
in order to allow replacement of the water filter
cartridge annually.
If you choose not to use a water filter (for example if
the appliance is connected to a filter water supply),
set the “Filter Bypass” function to ON in order
to avoid receiving unnecessary filter change
reminders.
For further details on how to access this function
setting, follow the instructions on page 17 of the
included instruction manual:
“Enabling the Filter Bypass”.