1
2
The distance between the edge of the door to the center of
the hole is the latch backset. The adjustable latch provides
two choices of backsets 2-3/8" (60mm) and 2-3/4" (70mm).
Change the backset for the latch according to the illustration.
For adjustments please refer to the following illustrations.
Note : The correct direction for the
cam is shown as the circle on
the left side.
a
c
b
Latch face plate
Prior to installation, please make sure that the face
plate is appropriate for the latch.
Drive
-
in
latch
Installation of the round face plate
Replace the old lock with the new one
To replace the old lock with this product on the same door, please confirm the
backset for the latch and the specifications for the face plate match. Please also
refer to the following instructions to adjust the backset and face plate to match the
existing door's specifications.
Install new lock on the new door
To install this product on a new door, please go through the
following steps to drill the hole.
Check that the lever direction meets the door handing. If not, please switch the
levers by following steps.
■
Installation Instructions
a. The illustration shows a backset of
(
).
b. Pull the cam all the way to the right, to adjust backset to 2-3/4" (70mm).
c. To restore back to 2-3/8" (60mm), push the adjustable sleeve all the way to
the left.
2-3/8" 60mm
Replace the face plate
1. Use the slotted screwdriver to pry open the
face plate and the lock body.
2. Install the appropriate face plate onto the latch
body.
Align the round face plate to the head of the latch,
and lock it into position.
Mark The Door With Template
Select the height and backset as desired on the door
face ; use the TEMPLATE as an indication to mark the
center of the circle on the door face and the center of
the door edge.
Drill Holes
Using the marks as a guide to drill a hole Ø2-1/8"
(54mm) through the door face for the lockset, then
a hole of Ø1" (25.4mm) for latch.
Identify Door Handing
Face the door from outside, the door is left handed if the hinge is on the
left-hand
side of the door, whereas the door is right handed if the hinge
is on the right-hand
side of the door.
Interior
Exterior
Door
Hinge
(Left Handed)
(Right Handed)
Before installing this product, please confirm the door opening
direction to make sure that the lever is installed in the correct
direction.
