7
8
Confirm button
For function setup.
Number buttons
To enter user codes. Each code
must be 4-10 digits long.
To be locked and unlocked with
the key.
Battery cover
Push it upward and outward to
replace the batteries.
Cylinder
Uses 4 AA Alkaline batteries.
Indication light
When the light is lit continuously, it
means the unit is in operation.
When it's blinking, it means low
battery and the batteries need to
be replaced.
Lock and unlock from the interior.
Lock/unlock button
Lock and unlock from the exterior.
Battery holder
Turn-piece
■
Specifications and Functions
1. Power supply
If the password is entered incorrectly more than 5 times, the system will initiate its
protective mode and stop functioning.
5. Programming Code (PC)
-1 The default programming code is “0000”. It is recommended that the user
change the programming code during initial installation.
5-2 There is only one programming code and is
5-3 The programming code cannot be used to unlock the door.
5-4 The programming code
5-5 The programming code can be changed anytime as needed.
DC6V, 4 AA, 1.5V Alkaline batteries. (not included)
2. Low battery indication
2-1 During operation, if the red light on the battery cover blinks and 10 short beeps
are heard, it means that the battery is low. The batteries need to be replaced
immediately.
2-2 All settings will remain active and won't change or disappear even if the
battery is down.
2-3 When the batteries are fully drained, the system can still be locked or unlocked
manually with the key.
3. Keypad light indication
4. Audio indication
4-1 1 short beep means the operation is normal.
4-2 2 long beeps mean the setting is correct.
4-3 3 short beeps mean operational error.
4-4 3 long beeps mean the default password has been restored.
4-5 5 short beeps mean password operational error. The system will initiate the
protective mode and stop functioning.
4-6 10 short beeps mean the battery is low.
5
used to set all functions.
must be 4-10 digits in length.
■
Operational interface
