5
a
b
6
b
c
a
3. Install the exterior lock body
a. Fit the spindle
through the square cam of the latch.
b. Fit the cable through the cross bore above the latch.
vertically
Spindle
Cable
The spindle must be vertical.
4. Install the interior mounting plate
a. Pass the cable through the cable hole on top of the interior plate. Then fasten the
interior plate with screws.
b. Examine whether the exterior lock unit and the interior plate are tilted. If so,
please loosen the screws for adjustment, and re-fasten the screws.
c. Wood screws or self-tapping screws may be used if needed.
(Wood screws are used for wooden doors, and self-tapping screws are used for
metal doors to increase bonding.)
Interior plate
Cable
Cable
Fasten screws
Wood screws or
self-tapping
screws
5. Install the interior lock body
a. Push the battery cover upward.
c. Install 4 AA Alkaline batteries and close the battery cover. Installation is complete.
b. Connect the interior and exterior cables. Align the interior lock unit to the spindle
and push it in (the turn-piece is horizontal). When the interior lock unit is flush
with the door, fasten with screws.
If the interior lock body cannot be flush with the door, please push the cable into
the cross bore.
Installation
screws
Battery
cover
