EZAutomation EZ 10 Series, Getting Started Manual, Page: 62 / 69

56 | P a g e
Sender Email Address
Enter the Email address which the emails will be sent from here. Also you can use the Send Test Email
option to verify that all your settings are correct.
The Send Test Email option requires all information to be entered and then it connects to your selected
panel (make sure have Serial/Ethernet connection to panel) and request that the panel send the email
to the specified recipient (you will need to enter a recipient in the Email recipient tab). If everything
works correctly the recipient should receive the test email. If the recipient does not get the email please
check all your settings.
Unsent Email FIFO
Sending email takes a certain amount of time and therefore email might be generated at a faster rate
than they can be sent. Therefore there is a FIFO queue where up to 8 unsent emails are stored till they
are sent. As mentioned this queue is a FIFO and therefore the oldest email will be dropped if a 9th email
is generated.
Note: The panel will attempt to send each email up to 3 times and then the email will be discarded. Each
attempt will be followed by short waiting period.