35 |
P a g e
Creating Your First Project
The following is a project tutorial. This section will take you through the process of creating a new
project, placing objects on the screen, and transferring a project to the EZTouch Panel unit. This should
help familiarize you with the EZTouch Editor environment.
Let's assume you have the EZTouch Editor 2.0 installed on your PC (if you don't, install now). Connect
the EZTouch Panel unit to your PC using the P/N EZ-PGMCBL cable or with an USB A to USB B cable
[printer cable]). Connect the EZTouch unit to your PLC using the appropriate panel to PLC cable.
Step 1:
In Step 1 you will be setting up your project by entering project information.
1.
From Project Information screen, click on the Open/New Project button.
2.
Under Project Name, type in Demo Project 1. The primary EZTouch Panel Program file has an
".ezp" suffix.
3.
Under Panel Family Select EZ12 and then in drop down select the Panel Family. In this demo we
are using an EZ12.
4.
Select the Panel size. In this Demo Program we are using the 8".
5.
Under Protocol/PLC Model select Automation Direct for PLC Manufacturer then in the
dropdown for Protocol/PLC Type select DirectLogic K-Sequence.
Summary of Contents for EZ 10 Series
