14 |
P a g e
EZ12 USB Features
The EZ12 Series HMI has been upgraded to include many new USB features. Since we listen to our
customer requests, certain features which were available in our software and hardware has been
improved and some new features has been added.
Note: Recommended USB size is 4 GB and maximum size that can be used is 8GB. Format is FAT32.
USB Firmware Upgrade
– All EZ12 panels will allow users to upgrade the firmware using a USB flash
drive. To do so, you will take the normal firmware and convert it to a USB firmware file (.mme). For
more directions please see the Firmware Upgrade Section.
USB Calibration
– All EZ12 panels allow users to calibrate the panel from the Setup Menu in the EZ12
Touch Panel. Also in case the calibration is such that you cannot access the Setup menu, you can use a
calibration file on USB (.cal) to initiate calibration on any panel. For more directions please see the
Calibration Section.
USB Setup Menu Access
– All EZ12 panels now allow users to disable access to the Setup Menu. If the
Setup Menu is disabled, then the user can use a setup USB file (.set) to go to the Setup Menu if need be.
This feature is outlined more in the Setup Menu Section.
USB Project Load
– As previous panels, all EZ12 panels allow users to load or transfer a project using
USB (.hmi). This feature allows users to have multiple project files on the USB flash drive and select a
particular file which should be loaded onto the panel. For more information please see the Project File
Load Section.
Summary of Contents for EZ 10 Series
