4
Down
Button
Boom
Legs
To operate the EZ Way Smart Lift
®
follow the steps below:
Pre-operation check
Before operating the unit, complete a maintenance
safety check for loose nuts and bolts and damaged
parts. Also, ensure the sling is not ripped, frayed
or showing signs of wear. EZ Way recommends
all slings be replaced after one year, or at the first
sign of wear. If the unit fails to operate, contact
your maintenance person. If necessary, the
maintenance person can call our service department
at 1-800-627-8940. NOTE: It is helpful for the
maintenance person to be near the unit when
making the service call.
Insert battery
Insert a fully charged battery pack into the battery
receiver on the mast of the EZ Way Smart Lift
®
.
(See FIG. 1)
Turn unit on
Push the ON/OFF button. The EZ Way Smart
Lift
®
will display a greeting message while several
diagnostic functions are performed. The EZ Way
Smart Lift
®
has a built-in timer that automatically
shuts off the unit after a period of inactivity.
NOTE: Push the ON/OFF button to power off
the EZ Way Smart Lift
®
.
The EZ Way Smart Lift
®
is operational when the
battery charge level is showing on the screen.
(See FIG. 2)
Adjust the emergency stop button
The RED EMERGENCY STOP BUTTON must
be in the UP position. The unit will not operate if
the button is in the down position. If the button
is in the DOWN position, the screen will indicate
EMERGENCY STOP. Turn it in the direction of
the arrow on top of the button to release it.
(See FIG. 1)
Figure 1
Figure 2
Emergency Stop
Button
Toggle
Switches
Capacity
(not shown)
Up
Button
Display
Window
On/Off
Switch
Hanger Bar
Spreader
Sling
Hangers
Actuator
Mast
Capacity
(not shown)
Sling
Bag
Battery
Pack
Battery
Receiver
Leg Spreader
Summary of Contents for Smart Lift
Page 19: ...19...