17
CUSTOMER SETTINGS MENU FUNCTIONS
Within the Customer Settings menu there are several functions that provide customer feedback. The functions
include an optional inspection reminder, lift usage measured in minutes, and diagnostic information. Below is a
description of each function.
Inspection Reminder – Optional
NOTE: A battery must be inserted in the unit at all times for the inspection reminder to be accurate.
The Inspection Reminder function tracks the last inspection occurrence. When the duration of time since the
last inspection exceeds 30 days, a reminder message will appear when the unit is turned on. The purpose of the
inspection reminder is to notify the user that the EZ Way Smart Lift
®
needs to be inspected using the EZ Way
Safety & Maintenance Checklist form included on pages 13 - 14. When the inspection is complete the reminder
can be reset in the Customer Settings menu as described below:
1) To enable/disable the Inspection Reminder enter the Customer Settings menu as described on page 13.
2) Press the right toggle switch to enter.
3) Scroll to Inspection Reminder using the UP and DOWN keys on the controls.
4) Press the right toggle switch to enter.
5) Scroll to choose Yes or No.
6) Press the right toggle switch to enter.
7) Press the left toggle switch twice to exit.
Inspection Complete
If ‘INSPECTION OVERDUE’ appears when the EZ Way Smart Lift
®
is turned on, inspect the unit following the
EZ Way Safety & Maintenance Checklist’. The EZ Way Smart Lift
®
will continue to operate normally.
Once inspection is complete, enter the Customer Settings Menu as described on page 13.
1) Press the right toggle switch to enter.
2) Scroll using the UP and DOWN keys to Inspection Complete.
3) Press the right toggle switch to enter.
4) Scroll to choose Yes.
5) Press the right toggle switch to enter.
6) Press the left toggle switch twice to exit.
Overweight Counts – Available on EZ Way Smart Lift
®
with scale
The Overweight Counts function tracks weight overload occurrences. When a weight overload occurs the
Overweight Counts register increments by one.
Actuator Minutes
The Actuator Minutes function tracks the accumulated amount of raising and lowering time of the actuator
by the minute. With each minute of runtime the Actuator Minutes register increments by one. This read-only
information provides accurate customer feedback of EZ Way Smart Lift
®
usage within the facility and can be
a valuable tool in monitoring a safe patient handling program. In the event of an actuator replacement the
Actuator Minutes register can be reset.
Actuator Overload Counts
The Actuator Overload Counts function tracks any actuator overload occurrences. When an actuator overload
occurs the Actuator Overload Counts register increments by one. Potential causes of an actuator overload
include accidental lifting of the EZ Way Smart Lift
®
against an obstruction, lifting a patient that is heavier than
the rated capacity of the unit, or mechanical failure (internal actuator binding).
Lift/Stand Total Minute Usage Count
The Actuator Total Minutes function tracks the accumulated amount of raising and lowering time of the unit.
The Lift/Stand Total Minutes is not reset when an actuator is replaced. This read-only information provides
accurate customer feedback of EZ Way Smart Lift
®
usage for the entire life of the unit.
Summary of Contents for Smart Lift
Page 19: ...19...
