background image

3

LCD Display

The EZ Way Smart Lift

®

 includes a built-in operator interface, backlit LCD (liquid crystal display) and key 

switches located on the front panel. This interface notifies the user of basic functions as well as provides 
diagnostic feedback from the unit. 

Basic Functions
The UP and DOWN keys located on the front panel, arrow keys on the hand control, and left and right toggle 
switches located on the sides of the control box can all be used to operate the EZ Way Smart Lift

®

 boom in an up 

or down direction.
When an UP switch is pressed the display reads ‘UP’.
When a DOWN switch is pressed the display reads ‘DOWN’.

Battery Status
When the EZ Way Smart Lift

®

 is sitting idle the display 

shows the battery level. The battery level is shown as a bar 
graph. The fewer the bars displayed the lower the battery 
level.
When the battery level becomes low swap the battery with 
a fully charged battery.  Regular battery charging will extend 
the life of your batteries.

LIMITED WARRANTY: Smart Lifts and Stands

Frame = 10 Years 

Components = 3 Years

Batteries = 12 Months 

Slings/Harnesses = 6 Months

EZ Products are manufactured with the highest quality components.  EZ Way Inc. warrants that all new equipment, with normal use 
and service, will be free from defects in material and workmanship for a period of (see above) from the date of purchase by the original 
purchaser.  Normal wear and tear, injury by natural forces, user neglect and purposeful destruction are not covered by this warranty.  
Warranty service must be performed by the manufacturer at 710 E. Main St., Clarinda, Iowa., or by an authorized repair center at their 
location.  On occasion, EZ Way Inc. may authorize in-house repairs, but these repairs MUST be pre-approved to avoid invalidation of 
the warranty.  Services covered under warranty include any labor that takes place at EZ Way Inc.  Cost of Labor incurred while installing 
the warranty part at the place of ownership is not covered by this warranty. EZ Way Inc.’s  obligation is limited to the replacement 
of parts that have been returned and are determined by EZ Way Inc. to be defective.    THE PROVISIONS OF THIS WARRANTY 
CLAUSE ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS 
OR LIABILITIES ON EZ WAY INC.’S PART AND IT NEITHER ASSUMES OR AUTHORIZES ANY OTHER PERSON TO 
ASSUME FOR EZ WAY INC. ANY OTHER LIABILITIES IN CONNECTION WITH THE SALE OF SAID ARTICLE.  IN NO 
EVENT SHALL EZ WAY INC. BE LIABLE FOR ANY SUBSEQUENTIAL OR SPECIAL DAMAGES.  ANY MISUSE, IMPROPER 
INSTALLATION OR TAMPERING SHALL VOID THIS WARRANTY.  Your warranty was registered automatically by EZ Way Inc. at 
time of purchase.

Summary of Contents for Smart Lift





















Reviews: