Page | 4
INTRODUCTION
This manual covers installation for the
44”, 52”, and 72” heights
of the PASSPORT® Vertical Platform Lift. Throughout
this document, the PASSPORT Vertical Platform Lift is also referred to as “VPL” or “Lift”.
Before using the VPL, read and understand this manual as well as the User Manual, Supplements (including the
PASSPORT® Vertical Platform Lift (VPL) Installation Supplement for 120” (10’), 144” (12’), and 168” (14’)
when using a
VPL over 72” tal
l), and Addendums, if any, in their entirety.
IMPORTANT SHIPPING INFORMATION
The PASSPORT Vertical Platform Lift is shipped with a packing list. Confirm all items are present before starting
installation. Open shipping boxes and inspect for damage or missing parts. If damaged or missing parts are
noted, DO NOT INSTALL OR USE.
Check for shipping damage immediately upon receipt and note any freight damage on freight bill while driver is
still present. Contact shipper right away with any freight damage concerns. In most cases, freight damage
claims will not be allowed unless noted on the freight bill. Pictures of damage before the unit is unpacked can
be very helpful.
REQUIRED TOOLS
1/8” ALLEN WRENCH
9/16” OPEN/BOX END WRENCH, SOCKET
7/32” ALLEN WRENCH
ADJUSTABLE CRESCENT WRENCH
3/16” ALLEN WRENCH
13/64” OR #7 DRILL BIT
3/8” DRIVE RATCHET
STANDARD PHILLIPS SCREWDRIVER
1/4” OPEN/BOX END WRENCH, SOCKET
STANDARD FLAT SCREWDRIVER
1/2” OPEN/BOX END WRENCH, SOCKET
PENCIL OR SIMILAR MARKER
7/16” OPEN/BOX END WR
ENCH, SOCKET
C-CLAMPS
TOOLS TECHNICIAN MAY FIND USEFUL
TORPEDO LEVEL
SPARE 5 AMP BLADE STYLE FUSES
TAPE MEASURE
ELECTRICAL TAPE
RUBBER MALLET
FLASHLIGHT
3/8” DRIVE SOCKET SET (1/4”
)
LED HEADLAMP
SIDE-CUTTING PLIERS
TORQUE WRENCH
DIGITAL MULTIMETER (DVM)
MAGNET PICKUP
PLUMB BOB
FILE
NEEDLE NOSE PLIERS
12
” 12AWG JUMPER WIRE
BLADE STYLE FUSE PULLER
HACKSAW OR COPING SAW
