Page | 29
9.4.8.
The top landing gate comes
with four 1/4” self
-drilling screws for attaching the top landing gate
sill
to the deck surface and two 5/16”
-18 x 4-
1/2” long hex bolts for attaching
the top landing
gate sill to the deck fascia (FIG. 9.4).
9.4.9.
Install four screws (two per side) and two bolts (one per side) as shown (FIG. 9.4).
9.4.9.1.
If the top landing gate is being attached to a concrete porch or deck, these screws
and bolts will need to be replaced with concrete anchors and alternate fasteners of
the same size (not included).
Follow the concrete anchor and alternate fasteners manufacture
r’s
installation instructions.
FIG. 9.4
