Page | 35
9.5.3.3.
Put latch cover assembly in place by sliding the mounting plate into the same
post channel as the existing gate latch mechanism mounting plate (FIG. 9.12).
The cut-out on the back of the cover fits around the latch mechanism
clamp plate.
Note the orientation of the mounting plate in post channel.
9.5.3.4.
Secure latch cover by tightening the 5/16”
-
18 x ½” button head socket cap
screw, accessed via the screw access hole, against the inside of the post
channel (FIG. 9.12).
9.5.3.5.
Place gate post cap back on latch post (FIG. 9.10).
9.5.3.6.
Test the gate for proper functionality and adjust latch cover up or down if
needed.
FIG. 9.12
